Some fun in the snow :) BOBFAHREN

The first time this year bobsledding. The pictures was made in the afternoon, so I used the submarine case and the flash. But some pictures turned out a bit dark.
I developed the roll on my own, it´s my fourth roll which I developed on my own. :)

4 Kommentare

  1. adash
    adash ·

    You definitely need a dust-free room to dry your film. I usually do it like that: After the film is developed, fixed and washed thoroughly, I pour in the wetting agent. While it is in, I go to the actual bathroom, and wash all walls with the shower (you don't need warm water for that). When washed thoroughly, I let the shower run for one more minute. Then, I stop the shower, making sure it won't keep dripping and making splashes onto the film, pour out the wetting agent (it is reusable) and hang the film carefully, without touching it to anything, in the bathroom. When dried completely, I cut it to peaces, wearing cotton gloves, and store it in special sheets.
    Also, make sure you process and wash your film with filtered water.

  2. rainboow
    rainboow ·

    @adash Thank you for the comment and help. I develop my film in the bathroom and without a wetting agent. And then I touch the film everywhere to wach the results :D and then I bring it to dry in the basement. Because there is not so much dust. And I have to say that on my scanner is dust, too...
    I think I will use the wetting agent and clean my scanner...
    :)

  3. adash
    adash ·

    You should better hang it in the bathroom itself - it will have the most dust-free air after you wash it and clean the air with the shower. And never touch it with bare hands.

  4. rainboow
    rainboow ·

    @adash Okay I will try it :)